OROS at SAE Noise and Vibration Conference
St Charles, IL - May 19–21, 2009
The only dedicated mobility noise, vibration and
harshness event in North America - will bring together automotive,
commercial vehicle and aerospace professionals from around the world to
learn about, present and display the latest technological innovations.
OROS will demonstrate its new version 5 of OROS Modal 2
Software which features an enhanced geometry module and an optimization
method for high numbers of channels. The latest version of NVGate, focused on rotary motion analysis,
including the latest advances in this technology will be demonstrated.
Visit OROS booth #215
|
SAE
Saint Charles, IL
May, 19-21
OROS Booth #215
|
OROS Introduces the SmartRouter, for Remote /
Stand-alone Noise & Vibration Analysis
|
|
Not able to be on-site to double check
your measurements (far away, not accessible, expensive trip…)?
Not
a big deal… Just use the OROS SmartRouter which stays close to
the
machinery, providing continuous survey and capture of its noise and
vibrations remotely from your office. Yes,
you can be virtually present in multiple places all over the world! You
may set or check any critical machinery through the Internet or a
Virtual Private Network (machinery |
health control -diesels,
transmissions, pumps and motors-, power generation control -gas, steam
& wind turbines-, vehicles field test -railways, automotive,
aircraft-)
Please contact your local representative
for more information.
ORBIGate V2, One Step Further in the
Turbomachinery Vibrations Analysis
Come check it out at ASME Turbo on June 9-12,
Booth #1319
|
Always willing to be closer to the turbomachinery world, OROS
releases the version 2 of ORBIGate with even
more functionalities for rotating analysis.
You will discover that results can now be calculated from continuously
recorded signals, using the post-analysis function. You will also be
able to subtract the run-out error from your results and to set up the
probe positions by steps of one degree. Based on OROS’
portable and rugged analyzers, ORBIGate tackles rotor and bearing vibration
issues for Turbines, Compressors, Pumps, Gear Boxes or other
Turbomachines. |
Everything
is done to make your life easier: Orbits, Shaft Center lines, Bode
diagrams and many other displays will be easily generated in the most
user-friendly software environment.
Go on the ORBIGate web-page and download the brochure (requires first
logging on to myOROS)
for more information send an email to info@orosinc.com
Version 5 of OROS Modal 2 Released Now!
 |
With the version 5 of
OROS Modal 2, the structural test solution is now even more refined and
mature. Assess the reliability of all the steps of a comprehensive
modal analysis with even more powerful algorithms. Try the newly
simplified geometry building module providing an interactive interface
to create and assemble objects. This module perfects the dedicated |
operations
panel containing the direct acquisition, signal processing part and the
pertinent Operating Deflection Shape. Be amazed by the efficiency
of Broadband methods for both Experimental and Operational modal
analysis completely optimized for high channel counts.
You may also download the updated brochure (requires
first logging on to myOROS) and the Release note
Register now on myOROS and join our community!
To Contact us, send an email
OROS Inc.
Noise & Vibration Solutions
502 Shaw Road B - 101
Dulles, Virginia USA
20166-9435
888-200-OROS (6767)
703-478-3204
www.orosinc.com
|
|
